The Latest TWRP recovery 3.0.0 is
released by TeamWin. It has a new theme.There are few new features added
to this built like adopted storage support for Marshmallow, true
terminal emulator, and few more. It is now officially available for many
device. Samsung Galaxy S7 G935F is a latest device,
•USB Mass Storage support
•Micro SDcard and USB OTG storage support
•f2fs file system support (read, write, format, backup & restore)
•exFAT file system support (read, write, format, backup & restore)
•NTFS file system support (read, write, format)
•Backup & restore of modem/baseband/firmware (not bootloader!)
•Full SELinux support
•Built in android 6.0 tree.
This site or the developers are not
responsible, if you damage or brick your device.Do it on your own risk
and follow the instruction properly.
How to Install The TWRP 3.0.0 Recovery On Samsung Galaxy S7 G930F
Step 1 –Download TWRP 3.0.0 Recovery for Samsung Galaxy S7G935F and extract this file anywhere in your computer:
Step 2 –Download ODIN v3.09 which will help you to flash Twrp Recovery on Samsung Galaxy S7 .
Step 3 – Put OFF your phone. Now boot to Download Mode. How? Press and
hold the Volume Down + Home buttons together, and then press the Power
button till you see the construction Android robot and a triangle. Press
Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Samsung Galaxy S7 USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes
will turn yellow with the COM port number. This step might take some
Step 7 – Now select the following file that you have to flash/install on
your phone. This file will be found from the extracted file in Step 1.
Click on ‘PDA’ / ‘AP’ and select the package file
(twrp-3.0.0-0-zerolteeu-zerolteeu.img.tar) you downloaded in step 1 for
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will reboot
into Recovery Mode automatically and install the root package / files.
Your ID:COM box will also turn green.
Step 11 – After you see the home screen, unplug your phone from the computer.
Your Samsung Galaxy S7 should now have TWRP 3.0.0 Recovery Installed in it.
To enter Recovery Mode, shut down phone and then hold down the Home +
Volume Up buttons and press the Power button for about 5 seconds to
enter Recovery Mode.