Home Android Custom Recovery How to Root Ulefone 007 Pro And Install twrp Recovery

How to Root Ulefone 007 Pro And Install twrp Recovery

960
0
Ulefone 007 Pro Twrp Recovery

TWRP Recovery For Ulefone 007 Pro and Root now available. If you are a Teclast Tbook 16 Power then this post is specially made for you to root your device with any problem and worries follow the guide in this post.  Teclast Tbook 16 Power is an 11.6-inch  tablet with 8GB of RAM and 64GB of Storage that is powered by Android 6.0 OS.

Ulefone 007 Pro Twrp Recovery

We will be flashing the TWRP Recovery to your Ulefone 007 Pro Power using AdbFastboot Method. It will wise you write the post very well before flashing the recovery to avoid any errors or brick of the device. I believe many using this table have googled on how to root their device without getting any good result worry not with this ported recovery you can now root your device in a minute and get the freedom you need to explore your Tablet the way you like it. Read the tutorial below to the end so that you can root your Ulefone 007 Pro
Things You Need
  1. PC
  2. VComm Drivers Window 7  Go Here
  3. VComm Drivers Window 8/10 Go Here
  4. Sp Flash Tool Download
  5. Download Magisk Superuser here   then save it in your phone memory, not SD card

Feature Of The TWRP Recovery

1. NVRAM backup
2. boot.img backup
3. Recovery.img backup
4. Uboot backup
5. Emmc repair
6. Recovery.img and boot.img install/flash
7.more features now working.
8.Most features are working
9. TWRP features working correctly…
Disclaimer
We are not responsible if you brick your phone at the process of flashing the recovery

 Install Recovery On Ulefone 007 Pro

  1. Connect your device to your PC
  2. Send the SuperSu to your external memory card
  3. Discount and put your Phone off
  4. The Ulefone 007 Pro TWRP Recovery you downloaded unzip it on your desktop
  5. Launch your Sp Flash Tools
  6. Click load the scatter file from the Sp Flash Tools
  7. Navigate and select the Android_scatter.txt file in the unzip Twrp folder
  8. Then tick just recovery in the Sp flash tools
  9. In the select option on Sp flash tools put Download  only
  10. Click Download
  11. After doing the above Connect your switched off device (with battery inside) to the PC via USB cord
  12. A progress bar should start running
  13. Wait till you get a Success message (green circle with OK), do not interrupt before then
Vola you have successfully flash recovery on your Ulefone 007 Pro next thing to do is to root your device, please use the SuperSu provided in this post other versions of SuperSu may not work for you.

How To Ulefone 007 Pro

Immediately after flashing your recovery
  1. Boot to recovery mode (power off your device then Hold power button and Volume Key same for five Sec.)
  2. In the TWRP mode, it may ask you to swipe to allow modification of System partition, tap Read Only.
  3. If it offer to root the phone, select No
  4. Click install on your recovery then navigate to the storage you have your Magisk  SuperSu.zip select it to root your device
  5. After Flashing navigate back and reboot
Congratulation your are rooted
Now Enjoy Your Rooted Device
Are You lost? Ask your Questions.
Share Post to your Friends
Credit
MDSdev
Emmanuel
 
TWRP Ulefone 007 Pro

LEAVE A REPLY

Please enter your comment!
Please enter your name here