Home Android Custom Recovery How To Root Tecno WX3P Install Recovery

How To Root Tecno WX3P Install Recovery

4020
0
How To Root Tecno WX3P Install Recovery

Root Tecno WX3P via Twrp recovery is now available. If you are a Tecno WX3P user then this post is specially made for you to root your device without any problem and worries follow the guide in this post. Tecno WX3P is a 5-inch device with a resolution of 1080 x 1920 pixels. It is powered by  Octa Core 1.3 GHz MediaTek MT6580  Processor, and it comes with 1GB of RAM and 8GB internal storage with support for memory card up to 32GB, it runs on Android 7.0 with and is powered on by a 5000mAh non-removable battery.

How To Root Tecno WX3P Install Recovery

To Root Tecno WX3P we are going to using the Philiz Recovery method via Flash Tool Mode. It will be wise you read the post very well before flashing the recovery to avoid any errors or brick of the device. I believe many using this device have googled on how to root their device without getting any good result worry not with this ported recovery you can now root your device in a minute and get the freedom you need to explore your device the way you like it. Read the tutorial below to the end so that you can root your Tecno WX3P.
Things You Need
  1. PC
  2. VComm Drivers Window 7  Go Here
  3. VComm Drivers Window 8/10 Go Here
  4. Sp Flash Tool Download

Feature Of The Recovery

1. NVRAM backup
2. boot.img backup
3. Recovery.img backup
4. Uboot backup
5. Emmc repair
6. Recovery.img and boot.img install/flash
7.more features now working.
8.Most features are working
9. TWRP features working correctly…
Disclaimer
We are not responsible if you brick your phone at the process of flashing the recovery

 

 How To Install Tecno WX3P Recovery 

  1. Connect your device to your PC
  2. Send the SuperSu to your external memory card
  3. Discount and put your Phone off
  4. The Tecno WX3P Recovery you downloaded unzip it on your desktop
  5. Launch your Sp Flash Tools
  6. Click load the scatter file from the Sp Flash Tools
  7. Navigate and select the Android_scatter.txt file in the unzip TWRP folder
  8. Then tick just recovery in the Sp flash tools
  9. In the select option on Sp flash tools put Download  only
  10. Click Download or Firmware upgrade.
  11. After doing the above Connect your switched off device (with battery inside) to the PC via USB cord
  12. A progress bar should start running
  13. Wait till you get a Success message (green circle with OK), do not interrupt before then
Vola you have successfully flash recovery on your device so next thing to do is to Root Tecno WX3P, please use the SuperSu provided in this post other versions of SuperSu may not work for you.

 

How To Root Tecno WX3P

Immediately after flashing your recovery
  1. Boot to recovery mode (power off your device then Hold power button and Volume Key same for five Sec.)
  2. In the TWRP mode, it may ask you to swipe to allow modification of System partition, tap Read Only.
  3. If its offers to root the phone, select No
  4. Click install on your recovery then navigate to the storage you have your Magisk  SuperSu.zip select it to root your device
  5. After Flashing navigate back and reboot

 

Congratulation your are rooted
Now Enjoy Your Rooted Device
Are You Lost? Ask your Questions.
Share Post to Your Friends

 

Credit
Hovatek
Emmanuel
Tecno WX3P Recovery

WX3P-H8017AB-N-170523V63
Download

LEAVE A REPLY

Please enter your comment!
Please enter your name here