Home Android Custom Recovery How To Root Cubot Rainbow 2 And Install Twrp Recovery

How To Root Cubot Rainbow 2 And Install Twrp Recovery

2024
0
Root-cubot-Rainbow-2

TWRP Recovery For Cubot Rainbow 2 and Root now available. All Cubot Rainbow 2 users can now root their device within a minute following the guide in this post.

 Root-cubot-Rainbow-2

We are going to guide you on how to Install Recovery on your Cubot Rainbow 2 then Root it via SuperSU. I believe many using this device have googled on how to root without getting any good result worry not with this ported recovery for Gionee S8 which will help you root your device in a minute and give you the freedom you need to explore your device the way you like it. Read the tutorial below to the end so that you can root your Cubot Rainbow 2
Things You Need
  1. PC
  2. VComm Drivers Window 7  Go Here
  3. VComm Drivers Window 8/10 Go Here
  4. Sp Flash Tool Download
  5. Download pHH SuperSU here   then save it in your phone memory, not SD card

Feature Of The TWRP Recovery

  • NVRAM backup
  • boot.img backup
  • Recovery.img backup
  • Uboot backup
  • Emmc repair
  • Recovery.img and boot.img install/flash
  • more features now working.
  • Most features are working
  • TWRP features working correctly…
Disclaimer
We are not responsible if you brick your phone at the process of flashing the recovery

How To Install Recovery On Cubot Rainbow 2

  1. Connect your device to your PC
  2. Send the SuperSu to your external memory card
  3. Discount and put your Phone off
  4. The Cubot Rainbow 2 TWRP Recovery you downloaded unzip it on your desktop
  5. Launch your Sp Flash Tools
  6. Click load the scatter file from the Sp Flash Tools
  7. Navigate and select the Android_scatter.txt file in the unzip Twrp folder
  8. Then tick just recovery in the Sp flash tools
  9. In the select option on Sp flash tools put Download  only
  10. Click Download
  11. After doing the above Connect your switched off device (with battery inside) to the PC via USB cord
  12. A progress bar should start running
  13. Wait till you get a Success message (green circle with OK), do not interrupt before then
Vola you have successfully flash recovery on your Ulefone Gemini next thing to do is to root your device, please use the SuperSu provided in this post other versions of SuperSu may not work for you.

How To Root Cubot Rainbow 2

Immediately after flashing your recovery
  1. Boot to recovery mode (power off your device then Hold power button and Volume Key same for five Sec.)
  2. In the TWRP mode, it may ask you to swipe to allow modification of System partition, tap Read Only.
  3. If it offer to root the phone, select No
  4. Click install on your recovery then navigate to the storage you have your SuperSu.zip select it to root your device
  5. After Flashing navigate back and reboot
Congratulation your are rooted
Now Enjoy Your Rooted Device
Are You lost? Ask your Questions.
Share Post to your Friends
Credit
Jemmi
Emmanuel

LEAVE A REPLY

Please enter your comment!
Please enter your name here