M-Horse CT1 is a 5-inch touchscreen display device with a resolution of 480 X 800 pixels. it powered by 1.2GHz dual-core Spreadtrum SC7731 Processor 1GB of RAM and 16GB ROM which can be expanded up to 32GB with microSD. it features a 5 Mp primary camera with LED Flash and a 2MP front selfie camera.
M-HORSE CT1 Stock Firmware
This page contains M-HORSE CT1 Stock Firmware files that allow you to restore your M-horse device’s to original factory state, you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state. Download any version factory image you need below.
If you own an M-Horse CT1 Top smartphone and you are looking for M-Horse CT1 Stock Firmware to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official stock Firm on your M-Horse CT1. This post has a link the take you to a guide that is easy and straightforward to follow to fix your bricked Samsung. We have listed the Stock Rom for M-Horse CT1 below. Download the file to fix your device.
Following this instruction on how to unbrick and upgrade your device from the link above us and the developer are not responsible for any damage to your M-HORSE CT1, so it wise to read the post very well and understand each line before flashing the stock firmware (Flash File).
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files.
The Advantage Of Stock Firmware:
Can be to unbrick your phone
Fix the Bootloop problem
Downgrade and Upgrade your phone
Fix Bugs or Unroot your phone
To fix the lag or stutter
You can solve software problem by flashing Stock ROM.
To gain your warranty Back
How to flash/upgrade this device
Download and install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the .pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key (Some new devices require holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete