Home Android Custom Recovery How To Root Blackview R6 Using TWRP Recovery Mode

How To Root Blackview R6 Using TWRP Recovery Mode


Root Blackview R6 via Twrp Recovery now available. All Blackview A6 users can now root their device within a minute following the guide in this post.

Blackview A65 is a 5.5-inch touch display smartphone which runs on Android 6.0 Marshmallow from the box and it features 3GRAM and 32G Internal Storage. it is powered by ARM Cortex-A53, 1500 MHz, Cores: 4 MediaTek MT6737T chipset.We are going to guide you on how to Install TWRP Recovery and root Blackview R6 via SuperSU. I believe many using this device have googled on how to root without getting any good result worry not this ported TWRP 3.0.2 recovery for Blackview R6 which will help you root your device in a minute and give you the freedom you need to explore your device the way you like it. Read the tutorial below to the end so that you can root your Blackview R6

Feature Of The TWRP Recovery

1. NVRAM backup
2. boot.img backup
3. Recovery.img backup
4. Uboot backup
5. Emmc repair
6. Recovery.img and boot.img install/flash
7.more features now working.
8.Most features are working
9. TWRP features working correctly…
We are not responsible if you brick your phone at the process of flashing the recovery  
Things You Need
  1. PC
  2. Unlock the bootloader of your Device Follow this Guide
  3. VComm Drivers Window 7  Go Here
  4. VComm Drivers Window 8/10 Go Here
  5. Sp Flash Tool Download
  6. Download SuperSU.zip here   then save it in your phone memory, not SD card

How To Install Recovery On Blackview R6

1. Connect your device to your PC
2. Send the SuperSu to your external memory card
3. Discount and put your Phone off
3. The Blackview R6 TWRP Recovery you downloaded unzip it on your desktop
4. Launch your Sp Flash Tools
5. Click load the scatter file from the Sp Flash Tools
6. Navigate and select the Android_scatter.txt file in the unzip Twrp folder
7. Then tick just recovery in the Sp flash tools
8. In the select option on Sp flash tools put Download  only
9. Click Download
10.After doing the above Connect your switched off device (with battery inside) to the PC via USB cord
12. A progress bar should start running
13.Wait till you get a Success message (green circle with OK), do not interrupt before then
Vola you have successfully flash recovery on your Blackview R6 next thing to do is to root your device, please use the SuperSu provided in this post other versions of SuperSu may not work for you.

How To Root Blackview R6

Immediately after flashing your recovery
  1. Boot to recovery mode (power off your device then Hold power button and Volume Key same for five Sec.)
  2. In the TWRP mode, it may ask you to swipe to allow modification of System partition, tap Read Only.
  3. If it offer to root the phone, select No
  4. Click install on your recovery then navigate to the storage you have your SuperSu.zip select it to root your device
  5. After Flashing navigate back and reboot
Congratulation your are rooted
Now Enjoy Your Rooted Device
Are You lost? Ask your Questions.
Share Post to your Friends

Blackview Users

Twrp Recovery Blackview R6 (FIXED)


Please enter your comment!
Please enter your name here