Hi, my friends am back again to give you this tutorial on to install Vcom Driver properly in your computer. Many of you fall victim to bricking in the process of tricking to tweak your phone. We advise you do a backup before going to the tweaking world. It will be great you this post How TO Flash Stock Rom or how to unbrick brick phone without getting this one vital information this tutorial on to install Vcom Driver properly in your computer which i have once been a victim of. Now i will guide you through step you must follow to install it properly. With USBDeview or USBDeview x64bit Pc Use it to clean up your PC from all possible old MTK VCOM entries, then reboot your PC.
Open Device Manager and leave it open! Switched off your smartphone and still don’t connect via USB to the PC remove the battery from the phone and inserted again now connect via USB to the PC, you should now see an MT65xx preloader in the Device Manager.
(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.)
Now install the driver from the unzipped USB VCOM drivers folder. Confirm the installation of
A Must read how to flash Android stock Rom now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correct!
Open Device Manager and connect the switched-off Smartphone via USB to the PC release (same USB port!)
Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry!
At the moment the MediaTek PreLoader USB VCOM appear double click on it navigate tothe driver and click on “Update driver” under the tab “Driver Details”. It will pop up a updater window asking you how will you like to update the driver just choose the option Browse My Computer For Software navigate to place you have driver you downloaded is and select to install if you get no error message that means you have Install Vcom Driver in computer properly [MTK Devices] after that you are good to go.