This page contains theZopo Flash S Stock Rom files that will allow you to restore your Zopo device back to its original factory state. you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a Zopo Flash S smartphone and you are looking for Zopo Flash S Stock Rom to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official stock ROM on your Zopo Flash S. This guide is easy and straightforward to follow. We have listed the Zopo Flash S Stock ROM below. Download the stock ROM file to fix your device.
ZOPO Flash S QUICK SPECS
Dimensions: 72.8 x 145 x 8.7 mm Weight: 150 g SoC: MediaTek MT6752 CPU: ARM Cortex-A53, 1700 MHz, Cores: 8 GPU: ARM Mali-T760 MP2, 700 MHz, Cores: 2 RAM: 2 GB, 800 MHz Storage: 16 GB Memory cards: microSD, microSDHC, microSDXC Display: 5.2 in, IPS, 1080 x 1920 pixels, 24 bit Battery: 2300 mAh, Li-Ion OS: Android 4.4.4 KitKat Camera: 4160 x 3120 pixels, 1920 x 1080 pixels, 30 fps SIM card: Micro-SIM Wi-Fi: a, b, g, n, n 5GHz, AC, Dual band, Wi-Fi Hotspot, Wi-Fi Display USB: 2.0, Micro USB Bluetooth: 4.0 Positioning: GPS, A-GPS, GLONASS, BeiDou
How To Flash Using SP Flash Tool:
Download & Extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume – button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
Select Download and click Start.
Connect device & Patiently wait for the process to complete.