Home All Android Stock Rom Firmware Download M-HORSE A8 Stock Rom Firmware

Download M-HORSE A8 Stock Rom Firmware

 M-Horse A8 Stock Rom is a 4-inch device with a touchscreen display of resolution of 480 X 854 pixels. It is Powered by 1.0GHz  Spreadtrum SC6820 Processor, 256MB RAM and 256MB ROM which can be expanded up to 32GB via microSD, M-Horse 630 runs on Android 2.3.5 Ginger Bread Operating system.

M-HORSE A8 Stock Rom

This page contains M-HORSE A8 Stock Rom files that allow you to restore your Samsung device’s to original factory state, you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state. Download any version factory image you need below.
M-HORSE A8 Stock Rom
If you own an M Horse A8 smartphone and you are looking for A8 Stock ROM to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official stock Firm on your M-Horse A8. This post has a link the take you to a guide that is easy and straightforward to follow to fix your bricked Samsung. We have listed the Stock Rom for A8 below. Download the file to fix your device.


Take Note
Following this instruction on how to unbrick and upgrade your device from the link above us and the developer are not responsible for any damage to your M-HORSE A8, so it wise to read the post very well and understand each line before flashing the stock firmware.


Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files.


The Advantage Of Stock Firmware:
    • Can be to unbrick your phone
    • Fix the Bootloop problem
    • Downgrade and Upgrade your phone
    • Fix Bugs or Unroot your phone
    • To fix the lag or stutter
    • You can solve software problem by flashing Stock ROM.
    • To gain your warranty Back
How to flash/upgrade this device
  1. Extract and Launch Research Download/UpgradeDownload Tool you downloaded
  2. Click on load icon
  3. Navigate to the folder containing the firmware
  4. Select the .pac file in the firmware folder
  5. Wait for it to load in Research Download/UpgradeDownload tool
  6. Click Play/Start button
  7. Now connect the device to PC while holding volume down key(Some new devices require holding volume up key)
  8. Wait for flashing process to complete
  9. When you see Passed! Then note that the flashing or upgrading process is complete
  10. Disconnect and boot up device



Please enter your comment!
Please enter your name here