This page contains the Lyf Water 1 LS-5002 Stock Rom files that will allow you to restore your Lyf Water 1 LS-5002 device back to its original factory state. you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a Lyf Water 1 LS-5002 Stock Rom smartphone and you are looking for Lyf Water 1 LS-5002 Stock Rom to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official Lyf Water 1 LS-5002 Stock Rom on your device. This guide is easy and straightforward to follow. We have listed the Lyf Water 1 LS-5002 Stock Rom below. Download the stock ROM file to fix your device.
Lyf Water 1 Specs
Lyf Water 1 IS a 5.00-inch touchscreen display device with a resolution of 1080 by 1920 pixels. Lyf Water 1 is powered by 1.5GHz octa-core Qualcomm Snapdragon 615 MSM8939 processor alongside 2GB RAM and 16GB of internal storage expandable up to 32GB via a microSD card.
The Lyf Water 1 runs on Android 5.1 and is powered by a 2600mAh removable battery.
How to flash this device using Qualcomm Flash Image Loader (QFIL)
Download and install the latest version of QPST from here
Download an install Qualcomm USB drivers from here
To launch QFIL, navigate to C:\Program Files\Qualcomm\QPST\bin)
Now connect your infinix hot 3 X526 to PC while holding both vol up & down button Device will be detected and you will see Qualcomm HS-USB QDLoader 9008 (COM XX).
Click Browse button under Select Build section the navigate and select the folder of the firmware.
Click on XML button from the pop-up, selectraw program XML file and then patch XML file.
Click Browse button under Select programmer sectionFrom dialogue box select the prog_emmc_firehose mbn file and click OK.
Click the Download button and wait for the flash process to complete.