This page contains the iNew L3 Stock Rom files that will allow you to restore your iNew L3 device back to its original factory state. You can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a iNew L3 smartphone and you are looking for iNew L3 Stock Rom to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official iNew L3 Stock Rom on your device. This guide is easy and straightforward to follow. We have listed the iNew L3 Stock Rom below. Download the stock ROM file to fix your device.
iNew L3 Spec
iNew L3is a 5.0-inch touchscreen device display with a resolution of 960 X 540 pixels. iNew L3 is Powered by 1.3GHz quad-core processor MediaTek MT6753 with alongside 2GB RAM and also 16GB of internal storage expandable up to GB with microSD.
iNew L3 runs on Android 5.0 Lollipop and is powered by a 2150Mah non-removable battery
How To Flash iNew L3 Using SP Flash Tool:
Download & extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume – button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
Select Download and click Start.
Connect device & Patiently wait for the process to complete.