This page contains the Elephone P10C Stock Rom files that will allow you to restore your Elephone P10C device back to its original factory state. You can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a Elephone P10C smartphone and you are looking for Elephone P10C 10B Stock Rom to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official Elephone P10C Stock Rom on your device. This guide is easy and straightforward to follow. We have listed the Elephone P10C 10B Stock Rom below. Download the stock ROM file to fix your device.
Elephone P10C SPEC
Dimensions: 71.5 x 139 x 5.8 mm Weight: 126 g SoC: MediaTek MT6582 CPU: ARM Cortex-A7, 1300 MHz, Cores: 4 GPU: ARM Mali-400 MP2, 500 MHz, Cores: 2 RAM: 1 GB, 533 MHz Storage: 8 GB Memory cards: microSD, microSDHC, microSDXC Display: 5 in, IPS, 540 x 960 pixels, 24 bit Battery: 1950 mAh, Li-Polymer OS: Android 4.4.2 KitKat Camera: 3264 x 2448 pixels, 1920 x 1080 pixels, 30 fps SIM card: Micro-SIM, Mini-SIM Wi-Fi: b, g, n, Wi-Fi Hotspot USB: 2.0, Micro USB Bluetooth: 4.0 Positioning: GPS, A-GPS
How To Flash Elephone P10CUsing SP Flash Tool:
Download & extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume – button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
Select Download and click Start.
Connect device & Patiently wait for the process to complete.