This page contains theCoolpad Note 3 Plus Stock Rom files that will allow you to restore your InFocus M5s device back to its original factory state. you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a Coolpad Note 3 Plus smartphone and you are looking for InFocus M5s Stock Rom to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official Coolpad Note 3 Plus Stock Rom on your device. This guide is easy and straightforward to follow. We have listed the Coolpad Note 3 Plus Stock Rom below. Download the stock ROM file to fix your device.
Coolpad Note 3 Plus Spec
Coolpad Note 3 Plus is a 5.50-inch touchscreen display device with a resolution of 1080 by 1920 pixels. Note 3 Plus is powered by octa-core 1.3GHz MediaTek 6753 processor alongside 3GB RAM and 16GB of internal storage which can be expanded up to 64GB via microSD card. For cameras Coolpad Note 3 Plus packs a 5-megapixel front shooter for selfies and a 13-MPmegapixel primary camera on the rear
The Coolpad Note 3 Plus runs on Android 5.1 Operating system and is light on by a 3000mAh non-removable battery.
How To Flash Using SP Flash Tool:
Download & extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume – button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
Select Download and click Start.
Connect device & Patiently wait for the process to complete.