The latest Android 5.1.1 Lollipop official firmware update is now
available for T-Mobile variant of the Samsung Galaxy S6 with the model
number SM-G920T.
The new firmware, which comes with the build number “G920TUVU2COF8,
includes better RAM management and improved battery life, according to
T-Mobile. In addition, the update also includes key bug fixes and
support for RAW and lower ISO values for third-party camera apps.
Users, who are yet to receive an over-the-air update for
the firmware, can install the new version on their devices manually
using Odin. In case of rooted devices, users will have to remove any
recovery software or custom ROM installed on their handsets.
Here are some key aspects to know before performing the manual installation:
  • All personal data on the device must have proper backup
  • The handset should have at least 80 percent battery power
  • USB drivers for the Samsung Galaxy S6 must be installed on the computer
  • USB debugging must be enabled on the phone
  • Make sure that the device is a Samsung Galaxy S6 with the model number SM-G920T
Note:  International Business Times cannot be held responsible if anything goes wrong. Users should proceed at their own risk.
Tutorial How To Manually Flash the Rom
Step 1:  Download Android
5.1.1 Lollipop update for T-Mobile Samsung Galaxy S6 and extract the
zip file. [File name: G920TUVU2COF8  G920TTMB2COF8_TMB.zip]
Step 2:  Download Odin and extract the zip file. [File name: Odin3_v3.10.6.zip]
Step 3:  Run Odin3 v3.10.6.exe as an Administrator.
Step 4:  Switch off the Galaxy S6 and boot it into
Download Mode. To do this, press and hold Volume Down, Home and Power
buttons together. After you get a warning screen, press Volume Up
button.
Step 5:  Now, connect the Galaxy S6 to the computer
via the USB cable. In Odin, an “Added!!” message will appear in the Log
box on bottom left, and the first box under ID:COM will show a code
with blue background.
Step 6:  Add the firmware file into Odin. To do
this, click on the AP/PDA button on Odin and select the extracted
.tar.md5 firmware file.
Step 7:  In Odin, make sure that the “Re-Partition” option is disabled while “Auto Reboot” and “F. Reset Time” checkboxes are selected.
Step 8:  Click on the Start button in Odin to begin flashing the firmware on the Galaxy S6.
Step 9:  After the installation is complete, the
Galaxy S6 will reboot automatically. You will get a PASS message on Odin
after successful installation of the firmware.
Step 10:  Unplug the handset from the computer.
      Enjoy the New Android 5.1.1 Lollipop Update For Samsung Galaxy S6 T-Mobile

LEAVE A REPLY

Please enter your comment!
Please enter your name here