•This Android 6.0.1 Tipsy Os is meant for only Gionee P4 and Walton Gh2. Please do not try on any other device.
•Your phone should have a custom recovery installed in order to install this Rom on your phone. TWRP 3.0.2 or Philz Recovery
•We will be using TWRP Recovery for flashing this Rom
•This Rom will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
•Don’t worry we are going to share step by step guide to safely
site or the developers are not responsible, if you damage or brick
your device.Do it on your own risk and follow the instruction properly.
Follow our guide below to download the Rom and install it yourself.
How to Flash This Tipsy Android 6.0.1 Marshmallow Rom On Your Gionee P4
Step 1 –Download the Tipsy OS 6.0.1 Marshmallow Rom and Google Apps for your device to your computer or device
Step 2 – Connect and mount your device USB memory on your computer using the USB cable.
– Now copy/paste the downloaded Android 6.0.1 ROM zip file and Google
Apps.zip files to your SD card. Make sure the files are in the SD card
root (not in any folder).
Step 4 – Then turn OFF your phone and disconnect from the USB cable.
Step 5 – Now boot in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together
– Once you are in Recovery Mode, select perform a full data wipe by
selecting “wipe data/factory reset”. Use the Power button to select
everything while in the Recovery Mode.
Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .
– Now this is optional, but it is recommended to perform a wipe of
your dalvik cache as well. You will not get into boot loops or any
other errors. From Twrp recovery, go to ‘advanced’ and then select “wipe
Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.
– Now select “choose zip from sdcard”. Using your volume keys,
navigate to the Android 6.0.1 ROM zip file that you copied to your SD
card and select it using the Power button. Confirm the installation on
the next screen and the installation procedure should start now.
Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.
– After the installation completes, go to “+++++Go Back+++++” and
reboot the phone by selecting “reboot system now” from the recovery
Your Device will boot now and it
might take about 5 minutes to boot on your first time. So, please wait.
Your Android phone should now have TipsyOS Android 6.0.1 Marshmallow latest
build installed on It! Go to Settings & About phone to verify.
Flash the Sd patch and Sensor patch after booting up the Phone
Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.