Step Guide of BeanStalk Android 4.4.4 KitKat custom ROM Installation on HTC One M7 (GSM) model:
Step 1: Download BeanStalk Android 4.4.4 KitKat custom ROM (HERE) in to your PC.
[Note: Before plugging the phone to the computer, be sure that you have installed USB driver software, if not, click HERE to download the firmware]
Step 3: Then, place Android 4.4.4 KitKat zip file into the phone’s SD card memory. [Note: Users are advised to paste the .zip file in SD card root, not in any other folder.]
[Note: Before installing the custom software, be sure that the device must have been rooted and has installed ClockworkMod Recovery tool.]
Step 4: Later, place boot.img file in to the android-sdk-windowsplatform-tools directory
Step 5: Now, turn off the device and disconnect from the PC.
Step 6: Perform the regular Bootloader mode sortie, by press holding ‘Volume (Down)’ and ‘Power’ buttons.
Step 7: After entering the Bootloader mode (on the phone), go to android-sdk-windowsplatform-tools directory (on the PC) and open Command prompt, then type in: ‘fastboot flash boot boot.img’ and press enter.
(To enter Command prompt: Shift + right-click >> open Command Prompt)
Step 8: Then, type – ‘fastboot reboot’ and press enter. Then, follow instructions displayed on the screen. Select BOOTLOADER option to enter Recovery Mode.
Step 9: After entering the Recovery mode, clear the phone memory, by choosing ‘wipe data/factory reset’ [Note: use Volume keys to navigate and power button to select options, while operating under Recovery Mode]
Step 10: Now, clear the cache memory by selecting ‘wipe cache partition’.
Step 11: Then to go back to ClockworkMod recovery, and select ‘advanced’ and tap ‘wipe dalvik cache’ [Note: This step is optional, but many recommend this procedure so that user will not face boot loops or any other errors in the middle of custom ROM installation]
Step 12: Again come back to main recovery screen and then tap ‘install zip from SD card’
Step 13: Then tap ‘choose zip from sdcard’ and go to Android 4.4.4 ROM .zip file in SD card and enter the installation process. [Note: use Volume keys to navigate and power button to select options]
Step 14: Once done with the installation process, navigate to ‘+++++Go Back+++++’ and re-start the device by opting ‘reboot system now’ seen in the recovery menu.
Now, your device (HTC One M7) will take a few minutes (only for the first time) to complete the booting process.
Head to Settings >> select About phone to confirm the installation of BeanStalk Android 4.4.4 KitKat custom ROM.
[Total: 0 Average: 0/5]